Request Information Request A Sample
CONASORB UF is a combination of a 1.5 mil. urethane film bonded to a polyester polyurethane acoustic foam. The black urethane film finish is extremely durable due to its highly elastic properties and is resistant to mechanical damage. This finish is suitable for very dirty environments and will withstand direct contact with water and most fluids found in industrial environments such as oils and cutting fluids.
Unit of Measure

Applications and Product Data

Uses

 N/A
  • Machine Guarding Liner
  • Engine Compartments
  • Enclosure and Silencer Liner
CONASORB UF is easy to apply and can be cut with common utility knives. For secure and permanent installations use specified adhesive - available from FirwinCorp.
Thickness1 N/A 0.5 in.

Standard Dimensions

 N/A Sheets: 54" wide X 72", untrimmed (27 sq.ft.)
Rolls: 54" widerolis (UF-50 and UF-100 only)
CUSTOM DIE CUTTING CAN BE PROVIDED

Performance Data

N/A Performance data is an extract from NRC - Ottawa report on tests according to ASTM C 423-90a.



NOTICE: Stated performance data is based on recognized testing methods. Product performance can be affected by field conditions and installation methods. Users of these products are responsible for determining suitability for their application and compliance with any legal provisions including those relating to health and safety.

Typical Physical Properties

Density

 N/A ASTM D 3574-86 — 1.8 - 2.2 lb. / cu. ft.

Tensile Strength of Foam

 N/A ASTM D 3574-86 — 15 psi, minimum

Tear Strength of Foam

 N/A ASTM D 3574-86 — 2.0 lb. / in. minimum

Flammability

 N/A MVSS 302 - Passes

Thermal Conductivity of Foam at 75°F (24°C)

 N/A ASTM C 518 - 0.27 Btu. in. / hr. ft.² ºF

Absorption Coefficient

N/A

Frequency (Hz) Absorption Coefficient (UF-50)
80 0.05
100 0.04
125 0.04
160 0.07
200 0.06
250 0.07
315 0.11
400 0.25
500 0.54
630 1.04
800 0.74
1000 0.47
1250 0.38
1600 0.33
2000 0.31
2500 0.29
3150 0.26
4000 0.26
5000 0.31
6300 0.36
NRC 0.35

  • 1 Also available - UF-200: 2.0 in.