Print Back
Silicone Coated Fiberglass Tape is designed to protect hoses, wires and cables from the hazards of high heat and occasional flame. It protects continuously to 500ºF and will withstand a molten splash at 2200ºF. Made of either knitted or braided fiberglass yarns in a flexible substrate, it is then coated with a high grade silicone rubber.

Resistant to hydraulic fluids, lubricating oils, and fuels, Silicone Coated Fiberglass Sleeve insulates against energy loss in piping and hosing; protects employees from burns; and allows "bundling" of wires, hoses, and cables. The braided version allows qualified hose assemblies to pass AS1055D testing under stated flow and pressure conditions.
Unit of Measure

Physical Properties

Tensile strength

N/A 450,000-500,000 psi.

Tape Material

N/A Fiberglass

Coating Material

N/A Silicone Rubber

Fiber Type

N/A E Glass

Breaking Tenacity

N/A 1.71 gf/TEX Wet 1.71 gf/TEX. Std.

Breaking Elongation

N/A 4.81% Std. 4.81% Wet

Elastic Recovery

N/A 100%

Average Stiffness

N/A 2824.3 cn/TEX

Specific Gravity

N/A 2.54-2.69

Effect of Heat

N/A Melts at 1121-1182degC Retains 75% tensile at 343degC Will not burn

Effect of Acids and Alkalis

N/A Resistance to acids is fair Good resistance to most alkalis.

Effect of bleaches and solvents

N/A Unaffected

Durometer, Shore A

N/A 35 (initial) 45 (aged 240hrs.@ 200degC)

Tensile Strength (psi.)

N/A 800 (aged 240hrs.@ 200degC) 875 (initial)

Elongation %

N/A 200 (aged 240hrs.@ 200degC) 500 (initial)

Flammability, UL94

N/A V-1

Dielectric Strength

N/A 485 volts/mil

Specifications

Width

N/A 4inches 102 mm
Tape Weight1 N/A 19.4 lbs/100ft
  • 1 xx in the item number denotes packaging. Standard packaging for sleeving is either 50ft.or 100ft/ box; tape 100ft./roll.
    Other sizes and cut lengths available. Consult factory for details and ordering information. Minimum order $100.00